Nearshore BIM Services

Nearshore BIM services for U.S. architects, engineers, and contractors

A senior nearshore BIM team in Sonora, Mexico — same time zone as the western U.S., native English, AISC and NCS literacy. Revit, Tekla, Navisworks, and Recap Pro under one roof. LOD 200, 300, 350, 400 modeled to your project execution plan, not a generic template.

Same time zone

No DST shifts

AISC compliant

AWS · NISD

Native English

On every call

24-48h quotes

Real numbers

Request a Quote Why Nearshore

Offshore BIM looked cheap on a rate sheet and stopped looking cheap somewhere between the third revision cycle and the third missed deadline. Nearshore BIM from Sonora puts a senior team an hour from the U.S. border, on your time zone, with native English on every call and deep AISC and NCS literacy. We model architectural, structural, and MEP disciplines for U.S. AEC firms — schematic design through fabrication-ready output. You send the project execution plan, the standards, the deliverable spec; we send back files that drop cleanly into your downstream workflow. We currently serve clients in Phoenix, Tucson, Las Vegas, Salt Lake City, Denver, Albuquerque, Dallas, Houston, Austin, San Antonio, Los Angeles, San Diego, San Francisco, Sacramento, Portland, and Seattle — across the western and central U.S. time zones — as well as east-coast clients on schedules that absorb the one-to-two hour offset.

What you get

Architectural BIM modeling

Revit architectural models from schematic design through construction documents. Family creation, sheet set production, and as-built modeling from PDF or point cloud.

Structural BIM modeling

Structural BIM in Revit and Tekla at LOD 300 to LOD 400. Steel, concrete, timber, and miscellaneous metals. Output ready for downstream detailing or direct fabrication.

MEP BIM coordination

Mechanical, electrical, and plumbing modeling in Revit MEP. Coordinated with architectural and structural disciplines. Clash detection in Navisworks, fabrication-ready spool drawings, and equipment family creation.

BIM outsourcing as overflow capacity

Send us a project, a discipline, or a sheet set. We work as an extension of your in-house team without the payroll commitment. Per-project, dedicated capacity, or hybrid engagement models.

Scan to BIM

Point-cloud-to-Revit and point-cloud-to-Tekla for as-built modeling. Recap Pro, Cyclone, and Faro workflows. LOD honest to the captured fidelity — no over-promising on what the scan supports.

LOD that means what it says

LOD 200 for design intent, 300 for documentation, 350 for coordination, 400 for fabrication. We match the LOD to your PxP — no over-build, no shortcuts, no LOD 500 on speculation.

Our process

Four steps from your scope to clean, fabrication-ready files

1. Discovery call

Scope, standards, deliverable spec, and timeline — thirty minutes, on Zoom, native English, with the lead modeler who will own your project.

2. Fixed quote

Twenty-four to forty-eight hours after discovery. Fixed scope, fixed fee, fixed timeline. No open-ended hourly billing that incentivizes the wrong behavior on both sides.

3. Kickoff and pilot

We start with a defined slice on a real schedule. Documented standards, conventions, and acceptance criteria. Weekly status calls in your time zone.

4. Delivery

Files in your environment, on your conventions, on the agreed cadence. Two revision rounds included by default. QA checklist signed before submittal.

Common questions

What buyers ask before sending us their first project

What does "nearshore" mean for BIM services?

Nearshore means a delivery team in a country geographically close to and time-zone aligned with the client. For U.S. firms, nearshore BIM from Sonora, Mexico means same-time-zone collaboration with the western U.S., a one-hour offset from the central time zone, and native English on every call — without the twelve-hour offset and language friction of offshore Asia or Eastern Europe.

How does nearshore BIM compare to offshore on cost?

Offshore rates typically run twenty-five to forty dollars per hour for BIM modeling; nearshore Sonora typically runs thirty-five to sixty per hour. The all-in cost — once rework, time-zone management, and revision cycles are included — usually lands within five to fifteen percent of offshore for a meaningfully better delivery experience and a far shorter project clock.

What LODs do you deliver?

LOD 200, 300, 350, and 400. We do not deliver LOD 500 on speculation — that level of fabrication-and-installation fidelity should be specified by the project execution plan, not assumed. Most projects land at LOD 300 for documentation and LOD 350 or 400 for coordination and fabrication scopes.

Do you work to U.S. standards and codes?

Yes — AISC 360, AWS D1.1, NISD references, NCS, AIA CAD references, and IBC documentation. We adapt to firm-specific conventions once they are documented and treat your standards as the baseline, not ours.

What software does your BIM team work in?

Revit, Tekla Structures, Navisworks, Revit MEP, AutoCAD, Recap Pro, IFC, Trimble Connect, and Dynamo. We deliver in the file formats you specify and integrate with your existing project portal or shared drive — we are tool-agnostic on collaboration platforms.

How quickly can you start a project?

Most engagements move from first call to project kickoff inside one week. Fixed quote in twenty-four to forty-eight hours after the discovery call. NDA executed before any project file changes hands.

How do you handle confidentiality and IP?

Mutual NDA standard before discovery. Project files stay in whatever environment you prefer — shared drive, your project portal, or direct file transfer. All intellectual property is yours by contract.

Can we start with one project to test the relationship?

That is exactly how every successful relationship starts. Pick a defined scope on a project where the schedule has some give. Run it end to end. Decide on expansion based on data, not promises.

Get a quote

Send your scope. Get a real quote in 24 to 48 hours.

No commitment, no sales sequence. Tell us about your project and we'll respond with a real number, a real schedule, and a named team.